QINGDAO YAOSEN MARINE INDUSTRIAL EQUIPMENT CO.,LTD

Favorite  |  Set Home
skype: S.L.BLUESEA
QQ: 672098863
E-mail: sales@slbluesea.com
Products > Marine Centrifugal Fan > CQ Marine High-pressure Centrifugal blower > CQ14-J Vessel Centrifugal draft blower fan
Product name : CQ14-J Vessel Centrifugal draft blower fan
Model : CQ14-J
Casing Material : Q235 CARBON STEEL
Impeller Material : ZL104 CAST ALUMINUM
Brand : YAOSEN MARINE
MOQ : 1 SET
←[Previous Product]              [Next Product]→
Online Inquiry         Email Us

  Details:
Dia.Size:350 mm
Air flow rate:5000 M3/H
Pressure: 1180PA
Power:4 KW
Frequency: 50/60HZ
Brand:Yaosen Marine
------------------------------------------------------------------------------------------------------------------------------------------------------------
CQ14-J Vessel Centrifugal draft blower fan
CQ Series Marine High pressure Centrifugal Fan
 
1. FOREWORD
CQ14-J Vessel Centrifugal draft blower fan is capable of blowing air, ocean air containing salt vapour, and corrosive air which contains oil vapour and a small quantity of acid steam generated by the natural evaporation of the batteries. So it can be used for ventilation of various machinery room and each compartment of boats and ships as well as other likes spaces.
The ventilator is designed and manufactured according to GB11865-89(Marine centrifugal fans) and the Rules and Regulations for the Construction and classification of Sea-going Steed ships approved by the Register of the People’s Republic of China.

2. WORKING CONDITIONS
CQ14-J Vessel Centrifugal draft blower fan
Medium temperature: -25℃ ~ +50℃
Max relative humidity: 95%
Periodical swing: ±22.5°
Continued transversal incline: ±15°
Continued longitudinal incline:±10°
Vibration: existent
I
mpact:  existent

3. CHARACTERISTICS
CQ14-J Vessel Centrifugal draft blower fan
Small size and light weight.
Low-noise ,low vibration.
Good anti-corrosiveness.
Good air tightness 
Small starting torque.
Strong resistance against swing, vibration and impact.

4. STRUCTURE TYPE
CQ14-J Vessel Centrifugal draft blower fan is designed and manufactured into a horizontal structure type or a vertical one, which the vane wheel is mounted directly on the motor shaft extension.
The vane wheel, being riveting structure is made of aluminum alloy and carefully balanced by static and dynamic ways.
Both the machine casing and the inlet are made of welded common steel . 
The ventilator can be made for left or right rotation:
Left rotation-viewed from the motor side, the vane wheel rotates clock-wise and indicated as “L”.
Right rotation-viewed from the motor side, the vane wheel rotates clockwise and indicated as “R”.
The outlet position of ventilator, according to the rotating direction of vane wheel, is made into the following main types. In conformity with the requirement, the outlet position is allowed to use other types, the step angle of which is 30°or 22.5°.
The ventilator can be matched with marine AC motor of 380V.50HZ or marine motor DC 220V.

5. Introduction for ordering
5.1 Please introduce the model, flow prate, pressure, speed and structure of fan、50HZ or 60HZ..
5.2 Please offer insulation class and protection class for fan motor (if not, the insulation class is B, protection class is IP44).
5.3 Our factory can offer the fans of special specification and usage according to the user's demands.
5.4 We are responsible for the repair, exchange and return of the products Within 18 months. 

6. Use and maintenance
6.1 Before installing the fans, should check whether each part is intact, whether the components are complete, whether the impeller and casing rotating direct are concordant.
6.2  The air enter the fan from axial direction and come out through the impeller. It can be used for left or right rotation.
6.3  When installing the duct of the inlet and should make the duct and fans be spontaneous 
outlet, identical, not join them forcing, not bring the weight of duct on the fans.
6.4 After installed the fans, check whether there is friction of collide between the impeller and the fixed parts by rotating the impeller. If collision, friction, loud noise or strong vibration happened, the fan should be restart after checking. Avoid the fan being bumped and other substance or liquid entered the fans. Please clean the dust on blade of impeller in time, so as not to break the balance and 
strengthen the noise.
6.5 The fans should be start-up without load. 

7. Outline dimensions

 

Please contact us and get detailed Technical parameters and Drawings.

We could Design and Produce the Marine fan,Industrial Fan,and Other Ventilation Equipment according to your detailed requirement !

  Related Products :

CQ9-J High pressure centrifugal blower fan
CQ9-J High pressure centrifugal blower fan

CQ7-J Vessel High pressure fan blower
CQ7-J Vessel High pressure fan blower

CQ5-J Ship centrifugal exhaust fan
CQ5-J Ship centrifugal exhaust fan

CQ3-J Marine Centrifugal fan
CQ3-J Marine Centrifugal fan

CQ24-J Industrial Exhaust turbo blower fan
CQ24-J Industrial Exhaust turbo blower fan

CQ20-J Marine Lavatory exhaust fan
CQ20-J Marine Lavatory exhaust fan

CQ17-J Ship air ventilator fan
CQ17-J Ship air ventilator fan

CQ15-J Marine centrifuge blower fan
CQ15-J Marine centrifuge blower fan

Online service

Skype: S.L.BLUESEA 672098863 sales@slbluesea.com steven@slbluesea.com