XQ I,XQ II series Cement kiln chute high pressure fan
1-use
XQ Ⅰ XQ Ⅱ inclined groove high pressure centrifugal fan is specially designed for cement kiln system. The fan can also be used for various kinds of furnace, melting furnace and forging furnace blast. However, it is only suitable for conveying air and non-corrosive, non-spontaneous combustion, non-explosive, non-viscous gas, and the temperature shall not exceed 80 ℃, and the dust and rigid particles contained in the medium shall not be more than 150 mg / m ~ (3).
2-type
1. XQ Ⅰ XQ Ⅱ fan is single suction and transmission mode is A type.
2Model XQ Ⅰ and XQ Ⅱ fans can be made into clockwise and counterclockwise rotation. From one side of the motor, the impeller rotating clockwise is described as "clockwise". Vice versa said the reverse cyclone, with the "inverse" said.
3. The outlet position of the fan is expressed by the angle of the casing outlet. The angle of "smooth" and "inverse" is usually made into five kinds of angles: 0 degrees 45 degrees, 90 degrees, 135 degrees and 180 degrees.
4, when the above machine number, transmission mode and outlet angle can not meet your production needs, our factory has the ability to redesign and manufacture for you until you are satisfied.
3-architectural feature
Type XQ Ⅰ and XQ II fan are composed of impeller, casing, inlet, seat and so on.
Impeller: the impeller is designed according to the new efficient forward fan theory. The impeller is operated smoothly and reliably by static, dynamic balance correction and overspeed test after forming.
Housing: welding cochlea with common steel plate.
Air inlet: welded with common steel plate to form convergent streamline structure with good flow performance.
XQⅠ XQⅡ series Cement kiln chute high pressure fan
2-type
1. XQ Ⅰ XQ Ⅱ fan is single suction and transmission mode is A type.
2Model XQ Ⅰ and XQ Ⅱ fans can be made into clockwise and counterclockwise rotation. From one side of the motor, the impeller rotating clockwise is described as "clockwise". Vice versa said the reverse cyclone, with the "inverse" said.
3. The outlet position of the fan is expressed by the angle of the casing outlet. The angle of "smooth" and "inverse" is usually made into five kinds of angles: 0 degrees 45 degrees, 90 degrees, 135 degrees and 180 degrees.
4, when the above machine number, transmission mode and outlet angle can not meet your production needs, our factory has the ability to redesign and manufacture for you until you are satisfied.
3-architectural feature
Type XQ Ⅰ and XQ II fan are composed of impeller, casing, inlet, seat and so on.
Impeller: the impeller is designed according to the new efficient forward fan theory. The impeller is operated smoothly and reliably by static, dynamic balance correction and overspeed test after forming.
Housing: welding cochlea with common steel plate.
Air inlet: welded with common steel plate to form convergent streamline structure with good flow performance.
XQⅠ XQⅡ series Cement kiln chute high pressure fan
MODEL |
SIZE |
TYPE |
SPEED |
ITEM |
CAPACITY m3/h |
TOTAL PRESSURE |
MOTOR |
||
Pa |
mmH2O |
MODEL |
POWERKW |
||||||
XQⅠ |
4.8 |
A |
2840 |
1 2 3 4 5 6 7 8 |
232 325 418 511 604 697 790 883 |
5028 5269 5422 5644 5419 5286 5082 4828 |
512 537 552 557 552 539 518 492 |
Y801-2 Y802-2 Y90S-2
Y90L-2
Y100L-2
|
0.75 1.1 1.5
2.2
3.0
|
XQⅠ |
5.4 |
A |
2840 |
1 2 3 4 5 6 7 8 |
330 463 595 727.5 860 992 1125 1257 |
6363 6669 6862 6918 6858 6690 6432 6110 |
649 680 700 705 699 682 656 623 |
Y90S-2
Y90L-2 Y100L-2
Y112M-2
Y132S1-2 |
1.5
2.2 3
4
5.5 |
XQⅡ |
4.7 |
A |
2840 |
1 2 3 4 5 6 7 |
585 747 908 1069 1231 1392 1554 |
5187 5287 5416 5469 5416 5351 5187 |
529 539 552 557 552 546 529 |
Y90S-2 Y90L-2
Y100L-2
Y112M-2
|
1.5 2.2
3.0
4.0 |
Please contact us and get detailed Technical parameters and Drawings.
We could Design and Produce the Marine fan,Industrial Fan,and Other Ventilation Equipment according to your detailed requirement ! - Previous Product:JWC series Centrifugal blower fan